OUR PRODUCTS

Chemical Metering Pumps

PULSAtron Electronic Metering Pumps

Pulsafeeder PULSAtron Series MP Pumps

Pulsafeeder PULSAtron Series MP Pumps

The PULSAtron Series MP pump offers automatic control; 4-20mA and 20-4mA current signals can be ratioed from 100% to 2% of incoming signal. The manual control feature allows for a combined 1000:1 turndown resulting in accurate metering for critical applications.

Series MP features relay output for computer interface or AC power allows for external control. There is a six-button touch pad control with internationally recognized symbols for simplified programming.

There are alarm signals for signal loss, full count, circuit failure, pulse overflow and pulse rate high. Liquid low level indicator capability is standard. Pulse signals can be multiplied or divided by 1 to 999 allowing for pumps to handle peak requirements.

Series MP is also equipped with a 16 character dot matrix backlit multi-lingual display that allows for easy reading and user-friendly programming.

Nineteen distinct models are available, having pressure capabilities to 300 PSIG @ 3 GPD, and flow capacities to 500 GPD @ 20 PSIG, with a turndown ratio of 1000:1. Metering performance is reproducible to within +/- 2% maximum capacity.

The PULSAtron Series MP contains an extended two year warranty on the electronic circuit board for trouble free service.

Features

  • Auto & Manual Control
  • Relay Output
  • Multi-lingual
  • Alarm Signals
  • Pulse Signals

Downloadable Files

Pulsafeeder PULSAtron Series MP Pumps Data SheetPulsafeeder PULSAtron Series MP Pumps Data Sheet
Pulsafeeder PULSAtron Series MP Pumps ManualPulsafeeder PULSAtron Series MP Pumps Manual
Pulsafeeder PULSAtron Series MP Pumps Menu MapPulsafeeder PULSAtron Series MP Pumps Menu Map


Pulsafeeder PULSAtron Series E+ Pumps

Pulsafeeder PULSAtron Series E+ Pumps

The PULSAtron Series E Plus pump features an automatic control available with 4-20 mA DC direct or external pacing, with stop function. It also offers manual control by on-line adjustable stroke rate and stroke length.

Series E Plus contains a highly reliable timing circuit as well as circuit protection against voltage and current upsets. This pump features solenoid protection by thermal overload with auto-reset.

Nineteen distinct models are available, having pressure capabilities to 300 PSIG @ 3 GPD, and flow capacities to 504 GPD @ 20 PSIG, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 2% of maximum capacity.

As with Series E, our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

A variety of chemicals can be pumped by Series E Plus such as glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, Hypalon«, Viton«, ceramic, alloys and 316SS.

Features

  • Agency Approved
  • Panel Mounted Fuse
  • Panel Indicator Lights
  • Safe & Easy Priming

Downloadable Files

Pulsafeeder PULSAtron Series E+ Pumps Data SheetPulsafeeder PULSAtron Series E+ Pumps Data Sheet
Pulsafeeder PULSAtron Series E+ Pumps ManualPulsafeeder PULSAtron Series E+ Pumps Manual


Pulsafeeder PULSAtron Series HV Pumps

Pulsafeeder PULSAtron Series HV Pumps

The PULSAtron Series HV offers solenoid protection by thermal overload with auto-reset. It also features an auto-off-manual switch.

Series HV has a guided ball check valve system to reduce back flow and enhance outstanding priming characteristics. It is also water resistant for both indoor and outdoor applications.

Five distinct models are available, having pressure capabilities to 150 PSIG @ 24 GPD, and flow capacities to 240 GPD @ 80 PSIG, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 2% maximum capacity.

Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Chemical liquid end materials that can be pumped include PVC, PTFE and 316SS.

Features

  • Panel Indicator Lights
  • Agency Approved
  • Auto & Manual Control

Downloadable Files

Pulsafeeder PULSAtron Series HV Pumps Data SheetPulsafeeder PULSAtron Series HV Pumps Data Sheet
Pulsafeeder PULSAtron Series HV Pumps ManualPulsafeeder PULSAtron Series HV Pumps Manual


Pulsafeeder PULSAtron Series A+ Pumps

Pulsafeeder PULSAtron Series A+ Pumps

The PULSAtron Series A+ offers manual control over stroke rate and stroke length as standard with the option to select external pacer for automatic control.

Six distinct models are available, having pressure capabilities to 250 PSIG, and flow capacities to 58 GPD, with a turndown ratio of up to 1000:1. Metering performance is reproducible to within +/- 3% of maximum capacity.

Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Series A+ pumps continue to meet their specifications for pressure and capacity even during extended use. That's because of our high quality solenoid and special enclosure that effectively dissipates heat.

A straight flow path and ample clearance between the diaphragm and head enable standard PULSAtron pumps to handle viscous chemicals up to a viscosity of 1000 CPS.

Agency Approved and water resistant for demanding outdoor and indoor applications.

Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, Hypalon®, Viton®, ceramic, alloys, and 316SS.

Features

  • Water Resistant
  • Continuous Duty
  • Safe & Easy Priming
  • Agency Approved
  • Optional External Pace and 1000:1 Turndown

Downloadable Files

Pulsafeeder PULSAtron Series A+ Pumps Data SheetPulsafeeder PULSAtron Series A+ Pumps Data Sheet
Pulsafeeder PULSAtron Series A+ Pumps ManualPulsafeeder PULSAtron Series A+ Pumps Manual


Pulsafeeder PULSAtron Series E Pumps

Pulsafeeder PULSAtron Series E Pumps

The PULSAtron Series E pump features manual control by on-line adjustable stroke rate and stroke length. It has been agency approved for demanding outdoor and indoor applications.

Series E is internally dampened to reduce noise which makes it very acceptable for household installations. It is also water resistant to accommodate outdoor installations as well.

It features guided ball check valve systems to reduce back flow and enhance outstanding priming characteristics. Series E also offers few moving parts and is easily wall mountable.

Nineteen distinct models are available, having pressure capabilities to 300 PSIG @ 3 GPD, and flow capacities to 500 GPD @ 20 PSIG, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity.

Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction lift characteristics. Our timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Series E pumps continue to meet their specifications for pressure and capacity even during extended use. It also features safe and easy priming with durable leak-free bleed valve assembly.

Features

  • Agency Approved
  • Water Resistant
  • Wall Mountable
  • Few Moving Parts

Downloadable Files

Pulsafeeder PULSAtron Series E Pumps Data SheetPulsafeeder PULSAtron Series E Pumps Data Sheet
Pulsafeeder PULSAtron Series E Pumps ManualPulsafeeder PULSAtron Series E Pumps Manual
Pulsatron Series Series E, A Plus and C Plus SpecificationsPulsatron Series Series E, A Plus and C Plus Specifications


Pulsafeeder PULSAtron Series C+ Pumps

Pulsafeeder PULSAtron Series C+ Pumps

Like the Series C the Series C+ offers manual control over stroke length and stroke rate as standard with the option to select external pace for automatic control. The primary difference is the pressure rating.

The Series C+ offers four distinct models with pressure capabilities to 80 PSIG, and flow capacities to 30 GPD, with a turndown ratio of 100:1. Metering performance is reproducible to within +/- 3% of maximum capacity.

Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Series C+ pumps continue to meet their specifications for pressure and capacity even during extended use. That's because of our high quality solenoid and special enclosure that effectively dissipates heat.

A straight flow path and ample clearance between the diaphragm and head enable standard PULSAtron pumps to handle viscous chemicals up to a viscosity of 1000 CPS.

Agency Approved and water resistant for demanding outdoor and indoor applications.

Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, Hypalon«, Viton«, ceramic, alloys, and 316SS.

Features

  • Agency Approved
  • Water Resistant
  • Safe & Easy Priming
  • Quiet Operation

Downloadable Files

Pulsafeeder PULSAtron Series C+ Pumps Data SheetPulsafeeder PULSAtron Series C+ Pumps Data Sheet
Pulsafeeder PULSAtron Series C+ Pumps ManualPulsafeeder PULSAtron Series C+ Pumps Manual
Pulsatron Series Series E, A Plus and C Plus SpecificationsPulsatron Series Series E, A Plus and C Plus Specifications


Pulsafeeder PULSAtron Series C Pumps

Pulsafeeder PULSAtron Series C Pumps

The PULSAtron Series C offers manual online stroke length adjustment with fixed stroke rate. Optional control features include external pace, a choice between momentary on/off switch for priming the pump, or a toggle on/off switch for manual override of all control functions.

Four distinct models are available, having pressure capabilities to 80 PSIG, and flow capacities to 30 GPD, with a turndown ration of 10:1. Metering performance is reproducible to within +/- 3% of maximum capacity.

Our guided check valves, with their state-of-the-art seat and ball designs, provide precise seating, and excellent priming and suction life characteristics. Out timing circuit is highly reliable and, by design, virtually unaffected by temperature, EMI and other electrical disturbances.

Series C pumps continue to meet their specifications for pressure and capacity even during extended use. That's because of our high quality solenoid and special enclosure that effectively dissipates heat.

A straight flow path and ample clearance between the diaphragm and head enable standard PULSAtron pumps to handle viscous chemicals up to a viscosity of 1000 CPS.

Agency Approved and water resistant for demanding outdoor and indoor applications.

Liquid end materials include glass-filled polypropylene (GFPPL), PVC, styrene-acrylonitrile (SAN), Polyvinylidene Fluoride (PVDF), PTFE, Hypalon®, Viton®, ceramic, alloys, and 316SS.

Features

  • Agency Approved
  • Liquid Low Level Option
  • Water Resistant
  • Safe & Easy Priming

Downloadable Files

Pulsafeeder PULSAtron Series C Pumps ManualPulsafeeder PULSAtron Series C Pumps Manual
Pulsatron Series C SpecificationsPulsatron Series C Specifications